web counter
Toyzuki v1 motor mount

Toyzuki v1 motor mount

<

thumbnail.asp?file=http://www.lockeduprc.net/chassis/toyzuki /841-tzscxmm.jpg&maxx=633&maxy=0

Attached Images

Toyzuki Fabrication V1 SCX10 Forward Motor Chassis Kit

You will receive a ToyZuki's Fabrication LGC motor mount, 2 5x11x4 bearings, and all the nuts and bolts to make it happen.

A 3 link/panhard kit is required to use this set up. You will receive a ToyZuki's Fabrication LGC motor mount, 2 5x11x4 bearings, and all the nuts and bolts ...

Attached Images

I don't tighten any of the screws until they are all in. then snug them equally all around until the bearings are pushed into the g10 and they are tight. ...

thumbnail.asp?file=http://www.lockeduprc.net/chassis/toyzuki /1300-tzfullchassiskit.jpg&maxx=633&maxy=0

Name: ImageUploadedByTapatalk1450359654.626074.jpg Views: 8098 Size: 32.5 KB

Click for larger images

Toyzuki SCX10 Motor Mount HD Crawler Transmission Spur Dual Slipper Pinion

... an internal spool winch laid on its side, but the front is also a great place to mount a small lipo or your electronics above or below the servo plate.

No photo description available.

For display purposes this was mounted to a box stock rig to show how it works.

Bringing the pain since 1968

I also ran the front and rear driveshafts. Plans for tonight. -Paint Moab body black -Wire up electronics -Connect servo -Build body mounts

Now back to the stock trans so we can finish the motor mount.

Now back to the stock trans so we can finish the motor mount.

Image may contain: outdoor

No photo description available.

Bringing the pain since 1968

Awaiting links, bumpers and body mounts.

Unfortunately for now I won't be able to run the full interior. My goal is to eventually have a Toyzuki V1 motor mount/transfer case.

Assembled the chassis last night and took a few mock-up shots.

No photo description available.

ToyZuki's Fabrication's photo.

Attached Images

No photo description available.

I used some large ball ends from a revo for my shock ends, but the stock plastic with a spacer behind it will do the same thing.

CMS

Added shock mounting holes to adjust your ride height

Awaiting links, bumpers and body mounts.

Toyzuki Fabrication V2 SCX10 II Forward Motor Chassis Kit (AXI90046 Kit Only) [TOY2019] | Rock Crawlers - AMain Hobbies

Part Number 843-TZtc

Toyzuki Fabrication V2 SCX10 II Forward Motor Chassis Kit (AXI90046 Kit Only) [TOY2019] | Rock Crawlers - AMain Hobbies

This chassis is designed for a CMS with the front motor mount. I wanted to try doing something different and go axle mounted on this rig.

1/10 scale LS style V8 engine motor cover for rc crawler like axial scx10

Alloy Car Refit Chassis Lift Plate Set Kit for 1/10 RC Axial SCX10 RC

Performance 3D Solutions

Sent from my Pixel XL using Tapatalk

Really like the cover vs to heat shrink. I plan on mounting the bec to the bottom of the tray to hide as many wires as possible.

1/10 RC Rock Crawler Off-Road Truck Chassis Frame Kit for Axial SCX10

GSPEED meets ToyZuki

1/10 RC Car Frame Kit CNC Aluminum for AXIAL SCX10 RC Crawler Climbing Car

TOY1990 Toyzuki Fabrication V1 SCX10 Forward Motor Chassis frame rails | #1887837820

-SSD axles -Toyzuki front motor mount -Vanquish t-case -Incision gears -ssd ti steering link -Proline BFG A/T -Dinky RC bedsides -RC4WD mirrors -Bomber ...

Lets start with the motor mount. The kit version uses 5 gears in the trans so I had to put 2 of them in the motor mount to use all 5 and ...

Same as the extra needed for the motor mount but with a different pin size for the gear (AX31410).

No photo description available.

ToyZuki's Fabrication

From Toyzuki V1 to a coyote killer thanks to the Lucky Duck Revolt predator call.

No photo description available.

No photo description available.

TOY1990 Toyzuki Fabrication V1 SCX10 Forward Motor Chassis frame rails | #1887837820

Attached Images

Just waiting on my HH motor and she is done.

An extra shaft will be needed to build the motor mount (AX31134) but it is a drop in fit with no drilling this time.

Click for larger images

Honcho finally complete. There's the transformation. -SSD axles -Toyzuki front motor mount

TOY1990 Toyzuki Fabrication V1 SCX10 Forward Motor Chassis frame rails | #1887837820

ToyZuki SCX10 2 Build #1

It's one of the few things I don't like about the frame. I think my bug (first picture below) is about as low as you would want to go with a compression ...

Thanks toyzuki!!

Honcho finally complete. There's the transformation. -SSD axles -Toyzuki front motor mount

This chassis is designed for a CMS with the front motor mount. I wanted to try doing something different and go axle mounted on this rig.

I might fabricate a bracket so I can move shock even more backwards but then I won't any down travel at all.

I cut up a piece of aluminum channel for an ugly quick 3 upper link mount!!

Due to the length of the chassis rails, they may ship separately.

Note: these are made to accept Revo sized ball ends. Included in the hardware is a single washer to help take up the gap if you run something smaller like a ...

Gspeed lcg chassi with a toyzuki motor mount kit on boomracing ar44 axles This thing is

Essential parts for the conversion removed:

This chassis is designed for a CMS with the front motor mount. I wanted to try doing something different and go axle mounted on this rig.

Here's where I'm planning on mounting the battery, just going to make a simple plate to mount here and use that and velcro to secure the battery:

item 3 Silver Alloy Chassis Lift Plate kit For Axial SCX10 1:10 RC Crawler Truck Car -Silver Alloy Chassis Lift Plate kit For Axial SCX10 1:10 RC Crawler ...

I cut up a piece of aluminum channel for an ugly quick 3 upper link mount!!

Chassis spreader installed.

Toyzuki Fabrication V2 SCX10 II Forward Motor Chassis Kit (AXI90046 Kit Only) | #1851711437

Toyzuki aluminum cms with axle and chassis panhard mounts

Essential parts for the conversion removed:

I had Performance 3D Solutions make me a new skid with properly spaced t-case holes and angled link mount. The angled link mounts make my rod ends as ...

I had to replace the rear raised frame brace as the bed sits flat on the frame. I cut up a toyzuki V2 rear brace I had to replace it.

Here's where I'm planning on mounting the battery, just going to make a simple plate to mount here and use that and velcro to secure the battery:

... quick throw together that anybody can do but, if theres enough interest in needing a bracket like this I'm sure I could come up with something prettier.

#toyzuki #v1 #newbuild #bumpersfordays #goodfriends #rc #crawler #tkoaxles

item 4 RCDM Skid Plate For Axial SCX10 (V1) Chassis -RCDM Skid Plate For Axial SCX10 (V1) Chassis

In the shop messing with the #toyzuki build. It's coming along, gotta get

Aolly RC SCX10 1/10 Scale 4WD Rock Crawler Chassis Frame Kit Assembled

Click for larger images

photo_library #rc #rccrawler #pnw #toyzuki #v1 #c2 #v3 #c3

G10 Motor Mount: LCG Skid

SCX10 with front motor mount kit. 55 deg.